background image

Preface

Regulatory Information

7

www.javad.com     

 

                                                                                                                                     

    

  

     

  

Regulatory Information

There are two modes implemented by firmware for the North America: <US MODE> and <CANADA
MODE>. 

• <US MODE> is preloaded/preprogrammed at the factory for HPT225BT VHF Transceiver sold to

US customers.

• <CANADA MODE> is preloaded/preprogrammed at the factory for HPT225BT VHF

Transceiver sold to customers in Canada.

The selection is not available to the customer. 

FCC Class A Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.

C

AUTION

:

Any changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void your authority to operate such equipment.

Canadian Emissions Labeling Requirements

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Réglement sur le matériel
brouilleur du Canada.

Industry Canada

The term “IC:” before the equipment certification number only signifies that the Industry Canada
technical specifications were met.

WEEE Directive

The following information is for EU-member states only: The use of the symbol indicates that this
product may not be treated as household waste. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and human health, which could

Summary of Contents for HPT225BT

















































Reviews: