19
To a new system:
1.
SELECT the “Display” icon from control panel and then tab on
“Settings” screen.
2.
Select
Advanced
at selection bar.
3.
Click on
Adapter
tab.
4.
Click the
Change
button at Adapter Screen
5.
Click [Specify the location of the driver (Advanced)] then check
Next
.
6.
Insert Software’s CD to CD ROM.
7.
Click Specify a location then under
Copy manufacturer’s file
from
statement enter
D:\Win9x,
click the
Next
button.(Where D is
the letter of your CD ROM drive, typically, D or E drives, etc.)
8.
Click Next to install “
3DForce4-Ti4200-8X, NVIDIA GeForce4
Ti4200 with AGP 8X”
driver.
(This selection is for both 64MB
and 128MB accelerators.)
9.
Click the
Finish
button.
10.
Click the
Yes
button next to restart computer.
InstallShield
Program:
Since the Microsoft InstallShield
program has been added into our
software’s CD, the Display Driver Installation and its procedures are
much easier for users to run with Windows
95/98/Me operating
systems. When you power-up the computer and boot-up the Windows,
the Plug-and-Play detects new hardware and it pops-up the Install
Wizard. Do Not
[Cancel]
because you must place a default display
setting from Microsoft Windows for your video adapter, then restart the
Windows. After the desktop is loaded completely, insert the software’s
CD into CD ROM drive and proceed to the display driver installation
which is provided from hardware manufacturer.
