Plug n Comply Installation Guide
5
Safety
Electrical Safety
General Electrical Safety Guidelines
Use the exact type of power cords as required.
•
Be sure to use power cord(s) that came with safety
•
certifications.
The power cord(s) must be compliant with the AC
•
voltage requirements in your region.
Plug the Power cord(s) into a socket that is properly
•
grounded before turning on the power.
Take extra precautionary measures when working
•
with high voltage components. It is not recommended
to work alone.
Before removing or installing chassis components, be
•
sure to disconnect the power first. Turn off the system
before you disconnect the power supply.
General Safety Guidelines
Warning!! Follow the guidelines below to avoid possible
damage to the system or injury to yourself:
To avoid injuries to your back, be sure to use your leg
•
muscles, keep your back straight, and bend your knees,
when lifting the system.
After removing the components or chassis covers from the
•
system, place them on a table for safeguard.
Avoid wearing loose clothing to preventing it from coming
•
into contact with electrical circuits or being pulled into a
cooling fan.
The handles are for sliding the chassis in and out of the
•
racks only. Do not carry the chassis by the handles.
