Installation
Plug n Comply Installation Guide
26
Relay Rules
Each relay rule specifies the domain to accept the relayed email for and the IP
to forward all the email to. In the example above, all of the email received for
plugncomply.com will be relayed to 192.168.1.103. A copy of each message will
be saved to the archive. Up to 9 relay rules can be configured.
NOTE: In most cases, this screen should be left blank as the Plug n Comply™ appliance is
a passive end-of-line appliance. This configuration is for extreme cases where the Plug n
Comply™ appliance is used as a mail gateway.
Web Configuration
Once you have configured Plug n Comply™ for your network you can configure
the data acquisition method and other relevant information using the web user
interface.
The Plug n Comply™ appliance segregates user access based on the user
function, hence three login screens are available. All of the system configuration
is done under the Administrator login except for user management which is done
under the Compliance Officer login.
