12
• If the plate is broken, switch off the appliance to avoid risk of short-
circuit.
• Do not place over the plates metallic objects such knifes, forks and
spoons.
• This appliance has been designed for domestic use only.
• VERY IMPORTANT: Do not immerse the main body and/or
the cable cord of the appliance in water or any other liquid.
• To unplug, pull from the plug, never from the cable.
• It is absolutely normal for the appliance to make some smoke
during the first few times it is used due to the coatings used in the
manufacturing process of the product.
• This appliance is not intended for using with an external timer or a
separate system of remote control.
• The cleaning and maintenance done by users, can not be done by
children without any supervision, unless they are over 8 years and
they are under supervision.
• If the cable were to deteriorate it must be changed by an
Authorised Service Centre.
INSTRUCTIONS OF USE
• Place the appliance on a flat and heat resistance surface.
• Put the bowl in the centre of the plate.
• Connect it to the network. The LED on the start button (2) will start flashing.
• Press to turn on the device. The power LED will light and the display will show “
----”
.
• Press repeatedly option (7) to choose one of the specific programs: Minimum Power, broth, steam, saute, fry,
braise and maximum power. If the container is not induction or diameter is very small, the device will detect that
the container is not valid and “E0” will appear on the display. After a few seconds it will be disconnected.
Function sauté, fry and stew:
• You can set the default operating time by pressing “
Preset tiempo
”. The display will start blinking.
• Press “+ or -” to adjust.
• Once the time has been set, it will be fixed in a few seconds. The display will stop blinking.
• To adjust the temperature, slide your finger on the regulator or press on the different powers.
Minimum power, broth, steam and boil function:
• In these functions the operating time and temperature can not be adjusted.
• However you can program the beginning of operation.
• Press “
Preset tiempo
”. “00:00” flashes in the display.
• Press “+ or -” to adjust.
• Once the time has been set, it will be fixed in a few seconds. The display will stop blinking. After this time,
the appliance will start to operate.
01 manual jata VIN145.indd 12
27/03/17 12:34
