9
INTRUCTIONS OF USE
• Connect the appliance into the mains and select the toasting level with the regulator
knob (2).
• In order to check the desired toasting you require initially, we recommend you to set
the regulator knob (2) turning to the right side to a medium position modifying it later
to adapt it to your taste.
• Put the bread into the slot (7) and press the control knob (1) downwards. The indicator
light of “Cancel” pusher (3) will light on.
• To toast frozen bread repeat the same process and press the “defrost” button (5). The
indicator light of this pusher will light on.
• Once the bread is toasted, the slices of toast will appear in the top of the slot (7).
• If after you have finished toasting the bread, it goes cold, repeat the toasting process
by pressing the control knob down and then press the “reheat” button (4). The indicator
light of this pusher will light on.
• If you wish to interrupt the toasting process, press the “cancel” button (3). Once pressed
the toaster will disconnect itself automatically and the slices of toast will appear in the
upper slot.
• While the toaster is working it is important to keep the crumb-collector tray (6) in
place.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning make sure the toaster is unplugged from the mains
and allow it to cool.
• To remove the crumbs from the inside of the toaster, you can tilt the toaster to the tray
side to leave the crumbs in this area. Next press outwards the flange that holds the tray
to open it. Remove the crumbs.
• Close again the tray by pressing to close it correctly.
• Do not insert any type of object.
• Use a dry cloth to clean the exterior.
• Do not use abrasive or chemical products, such a metallic scourers, which may deteriorate
the surfaces of the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of
the environment.
