Jata JVTE4235, Instructions For Use Manual

Page: 13 / 24

13
-
Turn on the fan and select maximum power, look at the blade that oscillates the most.
-
Turn off the fan and wait for it to come to a complete standstill. Place the balance clip in the middle of
the blade on the blade that wobbles the most. Turn on the fan and see if the oscillation has increased or
decreased.
-
Repeat this process on all the blades, observing which one achieves less oscillation.
-
Once the blade is selected, it will be tested by placing the balance clip a little closer to the tip or then a
little closer to the anchor, observing where the oscillation is less in movement.
-
Remove the clip where the oscillation is less and place a balance weight sticking it in the middle area at
the top of the blade.
-
If the problem continues, you can repeat the operation again with more balance weights.
INSTRUCTIONS OF USE
• To link the fan with the remote control, press the on/off button (a) on the remote control for 2 seconds until
you hear a sound, thus completing the link successfully.
• Remote control (13) :
-
On / off button (a).
-
Speed control (1-2-3-4-5-6) (b).
-
Light button (c).
-
Off timer (1H-4H-8H) (d).
-
Natural air mode (e).
-
Winter mode(f).
-
Disable sounds (g).
-
Shutdown delay (h).
-
Anti theft function (i).
-
OFF button (j).
•
Switch on the fan by pushing the button (a), to turn it off press it again.
• Press the speed control (b) to choose the desired speed from 1 to 6.
• To switch on the light, push the lighting button (c):
-
1 pulsation: Cold light.
-
2 pulsations: OFF.
-
3 pulsations: Intermediate light.
-
4 pulsations: OFF.
-
5 pulsations: Warm light.
-
6 Pulsations: OFF.
•
If you want to keep the same light tone always, once turned off, you must wait 1 minute before turning it on
again.
• To program it, press the timer (d) and select the desired time (1-4-8 hours)
• Winter mode (f) changes the direction of rotation of the blades, always try to do it when the motor is
stopped. To return to the initial direction of rotation, press it again. This option is perfect for lowering the
heat in the room and thus having a cozier thermal sensation in winter and greater energy efficiency.
• Natural air mode (e) adjusts the speed from 1 to 6 automatically.
• Deactivate sounds (g). Every time you press one of the buttons on the remote control, you will hear a beep;
by pressing this option, you will stop hearing it.
• Power off delay (h). The fan and light will turn off after 5 minutes.
• Anti-theft function (i) stops the fan and light, and after 4 hours, the fan and light will turn on for 15 minutes.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• Clean with a slightly damp cloth.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the surfaces of
the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.