14
15
•
The charge will last approximately 4 hours.
•
In order to optimise the durability of the battery bear in mind the following pieces of
advice:
- Never exceed the indicated loading times for the battery.
- It is important to discharge the battery before it is recharged, leave it on until it
stops or the power decreases clearly.
- The battery must be recharged every 6 months if it has not been used for said
period of time.
- Also recharge if it has not been used for more than a month.
•
Press the on/off switch (3) to start its operation. This will light up green and the battery
indicator will appear on the display, which will remain fixed.
•
You can change speed by pressing the speed selector (8), which lights up green or blue,
depending on the speed you choose.
•
The display (12) will show some numbers that indicate, as a percentage, how much use
the appliance has left.
LUBRICATION
•
For the hair clipper to work correctly
it is absolutely necessary to lubricate the blades
with oil before each use.
•
Carefully pour a few drops of oil, which is provided, between the teeth of the blade, or if
you have run out, with another high quality, acid free oil.
•
Turn the hair clipper on for a few seconds and clean the excess oil off with a cloth.
CUTTING GUIDES
•
The hair clipper is equipped with four cutting guides which allow for a accurate height of
cut in four different lengths (3-6-10 and 13 mm.)
•
To assemble the chosen guide place it in the blade (1) and press the bottom flange of the
guide to be inserted.
BEGINNING THE CUT
•
Relax and work slowly. Make short cuts. Do not go on to the final cut of one side or the
back straight away. Work gradually and all over the head.
•
It is better to cut a little each time to be able to cut some more later on.
•
While you are working and before you begin, comb the hair frequently to the chosen style.
•
It is better to cut the hair when it is dry, not wet. It is easier to see and control the amount
of hair you are cutting.
•
The first time you use the appliance it is advisable to cut a small portion of hair until you
get used to the different lengths of the guides. At first use the guide which allows the
longer cutting length (guide of 13 mm.). With a little practice you will soon choose the
most adequate guide for the length you wish to have.
•
After combing your hair following its natural direction, proceed as follows to obtain a
perfect haircut.
First step: NAPE
•
Start cutting at the centre of the nape and at the bottom of the neck. Hold the hair clippers
softly against the head with the teeth of the guide pointing upwards.
•
Go up gradually, working your way upwards and outwards, just cutting a little hair at
a time. When cutting raise the head of the clippers towards you little by little. Continue
cutting at the back of the head from the base of nape to the area just above the ears.
Second step: THE BACK OF THE HEAD
•
Put in one of the two guides corresponding to the desired length of 6 or 10 mm. and cut
the area at the back of the head.
Third step: SIDES
•
Using the 3 mm. cutting guide, start cutting the side burns and the area close to the ears.
Next, use the guide corresponding to the cutting length 6 or 10 mm. to go on cutting the
hair at the top of the head.
Summary of Contents for JBCP3325
Page 31: ...31...
