11
• The cleaning and maintenance done by users, can not be done
by children without any supervision, unless they are over 8
years and they are under supervision.
• If the cable were to deteriorate it must be changed by an
Authorised Service Centre.
INSTRUCTIONS OF USE
BEFORE THE FIRST USE
• Before using the coffee maker for the first time, clean the filters, the spoon, the water tank and the steam with
soap and water. Rinse well all the components.
• You also can clean the inner side of the coffee maker, to do it, fill the filter with water and switch it on several
times without coffee.
START
• Open the water tank lid (1) and remove the water tank (13). Fill with clean and fresh water till the MAX
indication and insert the water tank in its place.
• Plug the coffee maker to the mains and push the on button (7). The pilot light will flash.
• When connecting the coffee maker for the first time, it must be pre-heated. To do it, press the buttons 1 and 2
cups (8 and 9) at the same time during 3 seconds. The coffee maker will start to heat and the indicator light (4)
will flash till reaching the correct temperature to make coffee, keeping the light fixed.
COFFEE
• Before making any operation, always be sure that the steam regulator (5) is in off position “-”.
• Chose the filter (11 or 12), place it in the filter holder (10) and fill it depending on the coffee quantity you need:
-
1 cup of coffee: fill the filter for 1 cup (11) with the spoon filled of ground coffee (7 g).
-
2 cups of coffee: fill the filter for 2 cups (12) with the spoon filled twice of ground coffee (14 g).
• Press the coffee with the back side of the spoon, being sure there is not coffee remains in the edge of the
filter holder.
• Insert the filter holder (10) in its place by aligning the handle with the indication , pushing up and turning
to the right, to the indication until it is correctly inserted. Make sure that the handle of the filter holder stays
in perpendicular position when closing (90º).
• Place the cup or the cups in the tray (14) under the filter holder and switch on the coffee maker into the mains.
• Press the button for 1 cup (8) to get a cup of coffee with (50 ml) or 2 cups button if you need 2 coffee cups with
(100 ml). It will switch on the pilot light (2) and the coffee will start to flow. Once reached the programmed
quantity, it will stop. You can press the same button to stop the coffee outlet.
• Once finished, press the off button (7) and unplug the appliance.
ADJUST THE COFFEE VOLUME
• Press the button for 1 cup or 2 cups (8 and 9) during 3 seconds. The indicator light (4) will flash and the coffee
will start to flow.
• Press the same button to stop the coffee outlet.
• The coffee maker will memorize that coffee quantity and once pressed the buttons for 1 cup or 2 cups (8 or 9)
you will get that programmed quantity of coffee.
• Note:
-
Maximum adjustable volume is 200 ml.
-
Minimum adjustable volume is 30 ml.
• To adjust again the original quantity, press the buttons 1 and 2 at the same time during 3 seconds. The pilot
light (4) will flash and the adjustable volume will change once the pilot light stops flashing.
WARMING CUPS
• Place the cups upside down in the warming plate (3). When the coffee maker is hot, the plate with heat the
cups. The heated cups help to create and keep a frothy coffee.
01 JATA manual CA1051.indd 11
26/03/19 16:17
