9
• If the cable were to deteriorate it must be changed by an
Authorised Service Centre.
INSTRUCTIONS OF USE
• Keep pressed the tilt support pusher (2) and lift up the support (3) (Fig. A).
• To place the bowl (9) in the swivel base (10) keep pressed the swivel base and turn the bowl to the indicated
direction .
• Place the rods into the holes.
•
VERY IMPORTANT: The rods that have a ring in the edge must be placed in the hole with bigger diameter
of the blender showed with the letter “R”.
If it is not like this, there is risk of dough spill.
MIXINg RODS (7):
For liquid mixes, creams, egg whites, etc.
KNEADINg RODS (8):
They are designed to knead pastry and light dough.
• Place the rods in the corresponding holes pressing and turning around in order to have them correctly fixed.
Use always the rods together. Never use different rods together.
• Keep pressed the pusher (2) and move down the tilt support (3) (Fig. A).
• Select the speed with the selector (5).
• It is advisable to begin at the lowest speed (position 1) to then increase the speed to highest speed
(position 6). However, and depending on the texture of the food, you may use the highest position from
the start.
• Use the slide knob (11) to move the bowl in one or in other direction. Keep it pressed downwards and move
in one or other direction. With this action you will get a homogeneous dough (Fig B).
• Once you have finished, set the speed selector (5) to “0” position and unplug it from the mains.
• Keep pressed the support pusher (2) and lift it up.
• To take out the rods press the release button (4).
• To remove the bowl keep hold the turning base and turn the bowl in the indicated direction .
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• The accessories may be cleaned with soap and water. Try to do it as soon as you finish using it, because dry
texture of some foods are difficult to take out.
• Clean the body of the blender with a cloth dampened in water.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the surfaces of
the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
01 manual jata Mz670.indd 9
09/04/19 17:02
