Jaspi Inverter Nordic 8, Installer Manual

Page: 8 / 68

Transport
JÄSPI Inverter Nordic must be transported and stored
vertically.
NOTE
Ensure that the heat pump cannot fall over
during transport.
Check that the heat pump has not been damaged during
transport.
Lift from the street to the set up location
If the base allows, the simplest thing is to use a pallet
truck to move the JÄSPI Inverter Nordic to the set up
location.
NOTE
The centre of gravity is offset to one side (see
print on the packaging).
L
E
K
C:a 180 kg
Approx. 180 kg
If JÄSPI Inverter Nordic needs to be transported across
soft ground, such as a lawn, we recommend using a
crane truck that can lift it to the installation location.
When JÄSPI Inverter Nordic is lifted with a crane, the
packaging must be untouched.
If a crane vehicle cannot be used the JÄSPI Inverter Nor-
dic can be transported on an extended sack truck.
JÄSPI Inverter Nordic must be taken from its heaviest
side and two people are required to lift JÄSPI Inverter Nor-
dic.
Lift from the pallet to final positioning
Before lifting remove the packaging and the securing
strap to the pallet.
Place lifting straps around each machine foot. Lifting
from the pallet to the base requires four persons, one
for each lifting strap.
Scrapping
When scrapping, the product is removed in reverse order.
Lift by the bottom panel instead of a pallet!
JÄSPI Inverter Nordic Chapter 2 | Delivery and handling 8
2 Delivery and handling