Jason International, Inc. •
501.771.4477
Page 7 of 20
Customer Service : 800.255.5766
Copyright © 2018 Jason International, Inc.
FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.)
One main control touchpad mounted on the bath features several icons used by the bather to control
the bath. This section will outline the functions of the system when a particular icon is pressed. If the
icon is lit WHITE, then that particular option is available to operate. If the icon is lit BLUE, that par-
ticular option is currently in operation.
Unless otherwise indicated an ON/OFF function will take place with a single press on the button icon.
Some functions may require the use of a long press. A built-in timer shuts off the therapy equipment
twenty (20) minutes after being activated.
Standby Mode
In Standby Mode, no icons will be lit so only the JASON logo and non-lit Power icon
can be seen. If the keypad is ON but there has been no activity for one (1) hour, the keypad will revert
to Standby Mode.
STANDARD/PREMIER EDITION ELECTRONIC CONTROLS
POWER Icon
AIRMASSEUR Icon
MICROSILK Icon
LED Icon
Blower SPEED Icon
The POWER icon will activate the keypad.
•
Once pressed, all available option icons will
light WHITE and the POWER icon will light
BLUE.
•
Press and hold for two (2) seconds to turn off all
equipment and return to Standby Mode.
The LED icon will operate the Chromatherapy
Mood Lighting system. The LED system will
operate for 2 hours before turning OFF.
•
Once pressed, the icon will turn blue and the
LED lights will begin a SLOW FADE mode be-
tween all the colors.
•
A single press of the icon will progress the light
to the next mode or color.
•
Press and hold the icon to cycle through the
FADE mode, release the icon to choose any
custom color.
•
Order of Colors: Slow Fade Mode, Color Step
(changes each second), Purple, Green, Red,
-Blue, Yellow, White then Off.
The MICROSILK icon is used to activate the
MicroSilk unit and the 20-minute timer.
•
Once pressed, the microbubble generator will
start and the icon will turn BLUE.
•
Pressing the icon again will shut the unit OFF
and the icon will turn WHITE.
Starting the MicroSilk unit will turn OFF any other
therapy equipment running at that time.
The AIRMASSEUR icon is used to acti-
vate the blower and the 20-minute timer.
•
CONSTANT Mode will start with the first press
and the icon will turn BLUE.
•
WAVE Mode will start with the next press, indi-
cated by a slow flash of the icon.
•
PULSE Mode will start with the next press,
indicated by a rapid flash of the icon.
•
Pressing the icon again will shut the blower
OFF and the icon will turn WHITE.
•
Starting the AirMasseur will turn OFF any other
therapy equipment running at that time.
•
Once the system returns to Standby mode,
the icon will flash GREEN to indicate a purge
countdown. After twenty (20) minutes the blow-
er will turn on for two (2) minutes to allow the
air channel to dry. This will be indicated by the
AIRMASSEUR icon turning solid GREEN. This
purge cycle can be canceled by pressing the
holding the power button for five (5) seconds.
The SPEED icon is used to increase or de-
crease the blower speed once the blower is
ON.
•
Press and hold the icon to decrease the blower
speed until the desired intensity is reached,
then release.
•
Press and hold the icon again to increase
the blower speed until the desired intensity is
reached.
•
The POWER icon will flash red once the high or
low speed limit has been reached.
•
The blower will return to the highest speed on
any mode change.
