JASION EB7, User Manual

Page: 7 / 22

Assembly
4. Install the front wheel bearing nut covers.
2. Keeping the safety hook inside and the nut outside.
Make sure the sa�y hook is locked into the front fork.
3. Tighten the nut on the fork with wrench.
1. Locate the front wheel. Adjust the posi�on of the
front wheel to align the axle at the center of the
wheel with the center of front dropout.
Note:
When properly installed, the front wheel should be fully seated and centered in the dropouts of
the front fork, and the front wheel bearing nut should be fully and properly secured. Ensure the front wheel
are properly secured before moving on to the next step.
1 2
3 4
1. Locate the disk brake. Remove the two screws.
3. Adjust the posi�on of the brake and then �ghten
the screws, the brake rotor should be in between
the brake pads in the brake caliper.
4.Hold the cable to the frame with the clip.
2.Clamp the rotor between the two brake blocks.
Assembly
Note:
Rotate the front wheel by hand to test whether there is a fric�on sound. If there is a
fric�onal sound, you need to reinstall the front wheel and disc brake.
10
9