9
P150LT Plasma Hand Torch
The P150LT plasma torch supplied has the
‘
euro style
’
power/gas connection, pilot cable and switch pins connections.
All Jasic plasma cutting systems and torches supplied incorporate a safety circuit to prevent operator injury when changing consumables
etc. This is a simple ring circuit that breaks the electrical torch switching as soon as the retaining cap is removed preventing machine
operation. Without such a protection circuit as previously mentioned the open circuit voltage could be as high as 350V DC at the torch
head.
The torch head encompasses a full set of consumables as shown right, these consumables are
made up of a cooling tube, torch electrode, swirl ring for gas distribution, cutting tip, retaining
cap and if required a stand off device to ensure the same distance between tip and material
being cut.
Plasma Torch Connection Diagram
Wilkinson Star Technical
