Adjust brightness level from 0-100%.
Dimming lights cuts energy cost and extends bulb life.
Dims in 1% increments.
Adding your device to a Z-Wave network
Once the hub is ready to add your smart dimmer, press and
release the top button on the smart dimmer to add it in
the network.
To remove and reset the device
Once the controller is ready to remove your device, press and
release the top button on the smart dimmer to remove it from
the network.
To return to factory defaults
If plugged in, unplug from the receptacle. Press and hold the
top button for at least 3 seconds while you plug the dimmer into
the receptacle.
subject to change without notice
Distributed by Jasco Products Company LLC
10 E. Memorial Rd., Oklahoma City, OK
©Jasco 2018
3
28166
PRODUCT SPECIFICATIONS
