JARLTECH JP8031 series, Operation Manual

Page: 26 / 40

26
The "Special key" is as (picture 3-9) bellow, which is designed for
"special function", you may use the "special key " to define each
key as picture's below. i.e. In your key #1 setting field, click <F1>
from the special key and add it to your "current string property",
after you write it to map(you may use "single key program" to
write data of a key), press key #1. the <F1> function appears as
QWERTY PC keyboard behavior.
You may also set "ALT" and "Shift" functions key On/Off to fit your
expect. In keyboard mode, the capital characters cannot be type
on the field, and you may click "Shift ON" before the string to set
them on,
ie: <shift-on> abcd<shift-off>abcd,
The result will be : ABCDabcd
Programming Your Keyboard
If your operate Mode set to be RS232 interface, then, the
output should be RS232 recognized tool, ex: "Windows
Terminal"; When your operate Mode set to be keyboard mode.
The output should be keyboard recognized tool, ex: "Windows
notepad".
Above buttons of the"String Editor" field in the picture 3-9 are tools
for editing key contents. You may use them to edit string or
characters.
Note:
NOTE: The "Special key" can only exist on keyboard interface.