5
4
ASSEMBLY INSTRUCTIONS
Two-person team is recommended for assembly.
INSTALLING INTERNAL STEM
· Lay umbrella on soft clean surface. Attach finial to canopy structure.
· Pull locking rotating pin out to unlock internal stem from mast. Remove internal
stem from bottom of mast.
· Install internal stem onto steel base with supplied 4 bolts and tighten using
allen wrench. Do not use power drill. May cause damage to base.
· Slide internal mast stem cover over internal stem.
OPERATING INSTRUCTIONS
Remove all packaging from the umbrella.
OPEN THE UMBRELLA
· Remove the strap that holds the canopy structure to the mast when in the
closed position. Take note of the “parachute” folding method used to fold the
canopy when closed.
· Slightly loosen arms.
Caution: never force the arms
. If you experience any
resistance, make sure all arms are freed manually to facilitate opening.
· Turn adjustment knob counter clockwise and slide car half way up mast.
Tighten knob by turning clockwise to secure in place.
· Insert crank handle into “close / open” socket and crank handle clockwise until
canopy is completely open.
· Turn adjustment knob counter clockwise and slide car upward until umbrella
is at a horizontal shade position. Turn adjustment knob clockwise to secure in
place.
finial
internal
mast stem
Remove strap, turn
adjustment knob,
slide to mid mast.
Turn the crank handle
in the clockwise
direction to open the
umbrella.
Crank handle until fully
open, slide upward to
open position.
internal mast stem
internal mast stem cover
locking
rotation pin
· Using a two-person team, carefully lift umbrella
and insert bottom of mast onto internal mast
stem. Mast will stop when 2 cm away from base
plate. Pull out locking rotating pin to unlock.
Mast will continue to slide down internal mast
stem.
· Gently shake or turn mast to ensure locking pin
locates internal mast stem hole and is attached
to internal mast stem.
· You are now ready to operate your umbrella!
Cl
os
e
Op
en
Ri
gh
t
Le
ft
M
ax
M
ax
20
˚
20
˚
0˚