ASSEMBLY INSTURCTIONS
DA333BC CRIB
Thank you for purchasing this quality product. Be sure to check all packing material carefully
for small parts, which may have come loose inside the carton during shipment. Identify and
count all parts and compare with the parts list below.
NOTE: WHEN INSERTING SCREWS TURN CLOCKWISE UNTIL TIGHT. THEN LOOSEN
1/2-3/4 OF A TURN. AFTER CRIB IS COMPLETELY ASSEMBLED, RETURN TO EACH
SCREW AND TIGHTEN. USE WAX OR SOAP ON ALL SCREWS TO FACILITATE ASSEMBLY.
STEP 1:
TO ATTACH THE RIGHT BACK POST
(PART L
2
) TO THE RIGHT END
PANEL (PART I
2
) , FIRST ALIGN THE
WOOD DOWEL (PRE-SET ON THE RIGHT
END PANEL (PART I
2
) AND THE TOP
PRE- DRILLED HOLE ON THE RIGHT
BACK POST (PART L
2
). THEN USE 2
BOLTS (PART C) AND WRENCH
(PART D) PROVIDED TO SECURE THE
RIGHT END PANEL (PART I
2
) AND
RIGHT BACK POST (PART L
2
).
REPEAT THIS STEP FOR THE LEFT
FRONT POST (PARTL
1
) AND
LEFT END PANEL (PART I
1
).
STEP 2:
TO ATTACH THE RIGHT FRONT POST
(PART L
3
) TO THE RIGHT END
PANEL (PART I
2
) , FIRST ALIGN THE
WOOD DOWEL (PRE-SET ON THE RIGHT
END PANEL (PART I
2
) AND THE TOP
PRE- DRILLED HOLE ON THE RIGHT
FRONT POST (PART L
3
). THEN USE 2
BOLTS (PART C) AND WRENCH
(PART D) PROVIDED TO SECURE THE
RIGHT END PANEL (PARTI
2
) AND
RIGHT FRONT POST (PART L
3
).
REPEAT THIS STEP FOR THE LEFT
FRONT POST (PART L
4
) AND
LEFT END PANEL (PART I
1
).
PLEASE MAKE SURE THAT THE TOP OF
THE POST IS AT THE LOWEST POSITION
TO BE CONNECTED TO THE TOP OF THE
RA1L OF THE END PANEL WHILE
SCREWING
C
D
C
L
4
L
3
I
1
I
2
C
C
L
1
C
L
2
C
I
2
I
1
C
D
WOOD DOWEL
WOOD DOWEL
Page 3
