Japan Radio Co. NKG-84, Instruction Manual

Page: 38 / 100

28
5.2 If Paper Becomes Jammed
If the paper jams near the printer head, ask your nearest branch, business office or a dealer for inspection and repair.
5.3 Fuse Replacement
5.3.1 Removing the casing (Preparation for fuse replacement)
The procedure for removing the case is as follows:
(1) Turn power off.
(2) Cut off power to the printer by turning off the power switch on the power distribution panel.
(3) Remove screws 1 and 2 and then remove the rear cover.
(4) Disconnect the wiring from the terminal board on the rear panel of the equipment.
(5) Remove screws 4, 5, 6, and 7.
(6) Holding both sides of the casing, press terminal strip 9 with the thumb, and lift off the casing.
WARNING
The power switch on the power distribution panel must be turned off during
disassembly of the equipment. Failure to observe this warning could cause electrical
shock and/or malfunction.
CAUTION
Wiring must be disconnected from the terminal board disassembly of the equipment.
Failure to observe this caution cause electrical shock and/or malfunction.
CAUTION
If the paper in the printer jams, do not continue pressing the FEED switch.
When loading paper into the printer, cut the leading edge straight. Uneven cutting
may cause the paper to jam.