Japan Radio Co. NKG-84, Instruction Manual

Page: 37 / 100

27
5.1.3 Other general maintenance and check items
In addition to periodic checks by the self-diagnostic tests, it is recommended to check the following periodically.
Note: If the “out of paper” alarm activates to warn of paper outage, the receiver cannot be reset to stand-
by status just by adding paper. The alarm must be cleared by pressing the ALARM OFF switch
after adding papaer.
CAUTION
When loading the printer paper, cut the leading edge straight. Uneven cutting may
cause the paper to jam.
Contents Check Items
Printer
q
Does the printer feed paper one line at a time with each press of the FEED
switch?
w
Are there any missing dots in the print-out?
e
Is printing density normal?
r
Are there any abnormal sounds when the printer is operating?
t
Can printer paper be added smoothly?
Out-of-paper sensor
When the printer paper is cut off at the loading port, and the remaining stub of the
paper is removed from the printer:
q
Does the paper alarm lamp blink?
w
Does the paper alarm sound?
When there is no paper, and the ALARM OFF switch is pressed:
e
Does the alarm stop sounding?
r
Does the PAPER lamp remain blinking?
When printer paper is added:
t
Can the paper be fed by the FEED switch?
y
Does the PAPER lamp go out when the ALARM OFF switch is pressed?