Japan Radio Co. JLR-8400, Instruction Manual

Page: 74 / 218

4-26
5. Press the key to select "WPT LIST" and press the key.
6. The waypoint list of route will be displayed. Press the key to select the top of blank area,
and press the key.
The following items can be set in WPT No.
1) WPT No: You can set the waypoint number.
2) WPT LIST: You can select waypoint number from waypoint list.
(2-1) Entering Waypoint number by key
7. Press the key to select "WPT No", "WPT No" and "WPT No" and press the key.
8. Press the key to enter the waypoint number, and press the key.
(2-2) Selecting Waypoint number from Waypoint list
7. Press the key to select "WPT No", "WPT LIST". The waypoint list will be displayed.
8. Press the key to move the cursor to the waypoint number you wish to select, and press the
key.
9. Select "STATUS" of the waypoint.
The following items can be set in STATUS.
USE: The waypoint is used as a waypoint.
SKIP: Although the waypoint has been registered for the route, this waypoint is skipped to go to
the next waypoint.
10. Press the key to select "ENTER," and press the key.
11. When the waypoint has been registered, the screen will return to the waypoint list. Similarly, select
a waypoint.
12. When you have completed selection, press the key to return to route information screen.
13. Press the key to select "ENTER," and press the key.
Total distance and TTG (required time) will be displayed.
Waypoint List
ENTER