Japan Radio Co. jlr-21, Instruction Manual

Page: 95 / 148

5-33
5.3.9 Others Settings
When the current meter is connected, the layer to be displayed can be selected by the following
method:
Selecting
OTHERS from the "5.3 Main Menu" displays the Others Settings Screen.
1. Press the key.
2. Press the keys to move the cursor and select an item.
3. Press the key to display the menu for the selected item.
The following items are displayed.
CURRENT
• LAYER: Select the layer number for displayed.
• DATA NO.: Select the data set number of received data.
• Press to return to the Main Menu.
• In Maintenance Mode settings can be changed press and hold both and for 3
seconds or more to go to the mode.
●
For connection of a current meter
When a current meter is connected, STW (speed through water), CURRENT (current set and
speed of tidal stream), and DEPTH (depth of tidal stream) can be displayed.
(For the screen, refer to 4.1.5.)
1. Connect the current data to 1 and 2 pins of DATA IN/OUT2 connector. (Format is VBW and
CUR sentence, 4800bps. There is no setting item for inverval. Outputting in every 1 - 1.5
seconds from the output side is favourable.)
2. Select NMEA/CURRENT or BEACON/CURRENT in the DATA OUT4/IN4 menu in the DATA I/O
screen. (IN4 port will be set for CURRENT input.) By this procedure, the data of VBW, CUR
sentence, and 4800bps can be received.
3. Select the LAYER and DATA NO.
Others Settings Menu
Memo
Procedure