Japan Radio Co. jlr-21 Instruction Manual Download

Page: 90 / 148

5-28

5.3.7 Data I/O Settings (DATA I/O)

Selecting

DATA I/O

from the "5.3 Main Menu" displays the DATA I/O Settings Screen.

The DATA I/O Settings Screen can be used to confirm connection settings for external devices.

Version : Ver 1.5

Version : Ver 2.1

Version : Ver 2.3

Version : Ver 1.5

Version : Ver 2.1

Version : Ver 2.3

Data I/O Settings Menu

Screen display change example for NMEA selection

Screen display change example for output sentence settings

The set sentence is
displayed.

INTERVAL:

Sets the HDT, THS, ROT,
ATT, HVE, PJRC,GC and POT
output intervals.
To turn output on, set the
sentence selection to "ON".

* For SENSOR THROUGH, sentences other than HDT, THS, and ROT can only be set to "OFF" or "1s".

Screen display change example for NMEA selection

Summary of Contents for jlr-21





















































































































































Search results

Summary of Contents for jlr-21

Reviews:

Related manuals for jlr-21

Brands by name

Popular brands

Japan Radio Co. jlr-21, Instruction Manual

Search results

Summary of Contents for jlr-21

Reviews:

Related manuals for jlr-21

Brands by name

Popular brands