INITIALIZATION
4
Wiring
When using PoE for
power and data
, connect the CAT6
into the control board port as
shown below.
1.
No devices other than Nok
ē
products should be plugged into the switch.
2.
Use approved conduit only--never run high voltage inside. Always adhere to all local building
and electrical codes.
3.
If there are any discrepancies between your local building codes and this manual, always
adhere to local codes, which take precedence.
Nok
ē
Screen
Control Board
Cat6
Line
Power Board
(Close Up)
Entry
Point
