T R O U B L E S H O O T I N G
48
4)
The quiet speaker’s fuse has blown. In this case, please refer to the section on
page 36 about
fuses
.
Problem
: There’s a delay when I start playback before sound comes out of the speakers.
Solution
: Please refer to the section starting on page 20 about
input selection
.
Problem
: There’s no sound coming from either speaker, even though the green LED is
on and both speakers are powered on.
Cause
: The input selection was made by way of the arrow buttons on the remote control.
This will hard select the input, which isn’t matching the current source.
Solution
: Press one of the arrow buttons until sound is heard.
There will be two input settings that produce sound: one is auto-detect, and the other is
hard selection of the current input.
If you want the speakers to auto-detect which input has a signal, then press the button
until there is a brief pause before the LED comes back on and before sound is heard, as
opposed to an instant response.
There is more information on this topic in the section starting on page 20 about
input
selection
.
