Operation Manual / Spare parts list
Grooving machine KFU 830
14
Corundum safety floors
When grooving corundum safety floors we recommend using diamond blade no. 16.13690.
When changing the blade
In case of wider a grooved seam respectively frayed edges we recommend to exchange the blade
which got possibly blunt. Please compare 6.3.
6.4
Cleaning and maintenance
Before cleaning switch OFF the machine and disconnect the machine.
We recommend to clean the KFU 830 after each use – remove blade cover und clean grooving blade
and housing, as well as ejector pipe (and possibly used dust bag). Once a week respectively
depending to the frequent use we recommend to clean grooving machine KFU 830 with compressed
air. For an optimal grooving result we recommend to clean front and back leading rolls (pos. 7 and 8)
from remainders of adhesive or similar.
