Operation Manual / Spare parts list
Grooving machine KFU 830
3
1
Preliminary notes
Dear customer,
Thank you for buying a grooving machine KFU 830 – a professional and well-known product.
Grooving machine KFU 830 is built in reference to the latest requirements of the floor covering
industry. You can cut welding grooves in PVC, corundum safety floors, Polyolefine, rubber and
linoleum, as well as nap floors. The special advantage of this grooving machine is that it can follow
uneven floors very easily as the depth is taken near the blade; with this you can be sure that you do
not groove too deeply. Further it is powered by gear thus it is ensured to get constant power and very
good grooving result. Due to the special shape of the rollers the guidance in the grooved seam is very
comfortable.
Please take care of your new machine that it gives you pleasure and helps you to do a good job for a
long time.
Note
Please read the operation manual carefully, in particular the safety notes and ensure that all operators
read this operation manual prior to operate the machine.
Adherence to the safety notes not only helps to protect against potential dangers for health and
personal safety but also prevents an improper utilisation of the machine.
Pay attention and adhere to all warning labels on the machine. Replace any missing or damaged
labels immediately.
It is too late if you do it while working!
Never allow anybody without sufficient skills and knowledge to operate the machine.
This will allow you to operate the machine without running any danger and encountering any troubles.
It will help you to avoid any unnecessary delays caused by repairs, and will pave the ground for an
optimum utilization and operation of this equipment.
No liability for the damages which originate from the use of these operating instructions.
Changes reserve.
Janser GmbH
Böblinger Str. 91
71139 Ehningen
Telefon: 07034 / 127-0
Telefax: 07034 / 8838
[email protected]
http://www.janser.com State: June 2010