47
3.
Mount the cross profile between the base plates.
a.
Place the cross profile between the outer profiles of the leg.
b.
Fasten the cross profile on one side to the outer profile of
the leg.
c.
On the other side, grind off the cross profile, so that it can be
mounted on the outer profile.
d.
Drill one hole through the outer profile and the cross profile.
e.
Fasten the cross profile to the other outer profile of the leg.
4.
Mount the angle profiles on the ground at the end of the track of the
wheels, so that they serve as a stop. See
5.
Mount the D-shackles on the angle profiles and to the top side of the
leg. See
Figure 6.8, Angle profile as stop
1.
D-shackle
6.
Mount the chains between the D-shackles.
a.
Place the elevating belt with one wheel against one of the
two angle profiles.
b.
Now mount and tension the chain at the opposite side
between the D-shackles.
c.
Now place the elevating belt with the other wheel against
the other angle profile.
d.
Now mount and tension the chain on the opposite side
between the D-shackles.
Figure 6.9, Wheels and angle profiles of the wheel set (bottom view)
