2.
Gently place the prints on top of each other. All
magnetic strips should be in the same position.
Instruction Manual
Disassemble
1.
Take one edge of the printed panel and
carefully disconnect it from the frame.
6.
Place your hands on the flat side of the hinges
to prevent your fi ngers from getting stuck.
7.
Open the magnetic clips with a fi rm pull
downwards, and fold in the frame.
8.
Place the frame in the left (padded) section
of the case. Lock for safe and durable storage.
3.
Roll-up the print panels as one, and place them
in the right section of the case for storage.
4.
Disconnect all magnetic bars from the frame.
5.
Stack the bars on top of each other. All magnets should
be in the same position to prevent loss of power.
Scan for instructional video
