34
PROGRAM SETUP
Control panel
Control panel of micro controller unit has four buttons (see picture below).
• With pressing on a green button, you start a process.
• With pressing on a red button, you stop a process.
• With pressing MIX button, you start rotating a stirrer or you stop rotating a stirrer if it is
already rotating.
• With four buttons (up, down, left, right) you manipulate process data and
settings.
With keys up and down you can change entered values.
UP
LEFT
STIRRER
ON/OFF
DOWN
START
RIGHT
STOP
When device is energized you can read milk temperature on the screen.
Before start of the heating process make sure the device is properly filled with water and
that settings are properly adjusted.
MILK TEMPERATURE
Summary of Contents for Milky FJ 30/115V
