manualshive.com logo in svg

Janome Sewist 740DC, Instruction Book, Page: 44 / 68

Share
Download
Janome Sewist 740DC Instruction Book Download Page 44

42

Tacking is used to reinforce pockets, crotches and belt 

carriers where extra strength is needed.

Tacking

q

 Stitch pattern: 

23

w

 Thread tension dial:  3 to 6

e

 Presser foot:  

Satin stitch foot F

q

w

r

Start sewing

Start the machine and sew until the machine stops 

automatically. The machine will sew a tacking 5/8˝ (1.5 

cm) long.

 

q

 5/8˝ (1.5 cm)

Sewing a shorter tack

To sew a tack shorter than 5/8˝ (1.5 cm), first stop the 

machine after sewing the required length, then press the 

reverse button.

The tack length has been determined.

Start the machine again and continue sewing until the 

machine stops automatically.

 

w

 Required length

 

e

 Reverse button

 

r

 Tack length

Sewing a same-size tacking

Simply start the machine to sew another tack at the same 

size.

NOTE:

To reset the size of the tacking, select the other stitch 

pattern and reselect the tacking.

4

w

e

q

e

r

Summary of Contents for Sewist 740DC





































































Reviews:

No comments