Janome OC 6260, Instruction Book

Page: 7 / 52

5
GETTING READY TO SEW
1
1
2
A
B
Connecting to the Power Supply
1. Turn the power switch OFF.
2. Insert the foot control jack into the machine socket.
3. Insert the machine plug into the machine socket.
4. Insert the power supply plug into the outlet.
5. Turn the power switch ON.
Power switch
Machine plug
Machine socket
Controller plug
Power supply plug
Outlet
The LED display will show “ 01” (straight stitch) after one
second.
LED display
Initial setting
Controlling Sewing Speed
Speed control lever:
You can set the maximum speed by the speed control
lever.
A: Slide the lever to the right for higher speed.
B: Slide the lever to the left for slower speed.
Foot control:
Sewing speed is varied by the foot control.
The harder you depress the foot control, the faster the
machine runs.
CAUTION: Do not place any thing on the foot control
when the machine is not in use.
OPERATING INSTRUCTIONS:
The symbol “ ” of a switch indicates the “ OFF ”
position of a switch.
For appliances with a polarized plug (one blade is wider
than the other).
To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If it does not fit
fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not modify the plug in any
way.
Foot controller Model 21249 is used with sewing machine
Model 6260.
1
2
3
4
5
6
1
2
2
1
2
1
4
3
3
6
5
2