Janome OC 6260, Instruction Book, Page: 10 / 52

8
Changing the Presser Foot
WARNING: Turn OFF the power switch before changing
the foot. Always use the proper foot for the
selected pattern. Wrong foot can cause
needle to break.
To snap off:
Raise the needle and presser foot.
Press the black lever on the back of the foot holder and
the foot will drop off.
Lever
To snap on:
Place the presser foot so the pin on the foot lies just
under the groove of the foot holder.
Lower the foot holder to lock the foot in place.
Pin
Groove
Detaching and Attaching the Foot Holder
WARNING: Turn OFF the power switch before detaching
or attaching the foot holder.
To detach:
Raise the presser bar and turn the setscrew counter-
clockwise to remove it.
Remove the foot holder.
Setscrew
Hole on the holder
Threaded hole
To attach:
Align the hole in the foot holder with the threaded hole on
the presser bar and insert the setscrew through the hole.
Tighten the setscrew by turning it clockwise.
1 2
1 2
1
4
2
3
1 1
3
2
1
2
3
1
2
1
2
1
2
3