www.toews.com
26
Threading the Machine
Using the needle on the right
(for regular three-thread serging)
When the needle is set on the right, the standard
sewing width is 3.5 mm.
The illustration on the left shows you how to thread
the needle.
Note:
Tighten the needle clamp screw on the side that is
not being used to prevent losing the screw.
Using the needle on the left
(for wide three-thread serging)
When the needle is set on the left, the standard
sewing width is 5.7 mm.
The illustration at left shows you how to thread the
needle.
Note:
Tighten the needle clamp screw on the side that is
not being used to prevent losing the screw.
Janome MyLock213D Instruction Manual
Janome 213D Serger
www.toews.com
MyLock 213D Owners Manual/ User Guide
