www.toews.com
16
• Threading the Lower Looper
Open the looper cover and side cover.
Place the spool of thread on the right side spool pin.
*
The points to thread for lower looper are marked
in green.
*
A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the right side thread
guide from back to front:
A
*
If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown:
B
q
Thread guide
2. Pass the thread through the holes on the right side
of the thread guide plate as illustrated.
w
Thread guide plate
3. Pass the thread through the right side of the
looper thread guide, by sliding the thread from
left to right.
e
Looper thread guide
1
2
3
(A)
(B)
q
w
e
q
w
e
r
t
y
o
!0
u
!1
i
3
2
1
Janome MyLock213D Instruction Manual
Janome 213D Serger
www.toews.com
MyLock 213D Owners Manual/ User Guide
