Janome MB-4S, Instruction Book

Page: 65 / 92

63
OFF
17
[16] Locking stitch ON/OFF (after color change)
The threads may ravel if the stitch data does not
contain locking stitches at the beginning of each color
section.
To avoid raveling, insert locking stitches at the
beginning by pressing the right arrow button
to
indicate [ON].
Press the left arrow button to disable this function.
Press the ENTER button to register the new setting or
press the upward arrow button
to go to the next
setting.
[17] Locking stitch ON/OFF (after thread trimming)
If you turn ON the jump thread trimming (refer to the
previous page), insert locking stitches after the jump to
avoid threads from raveling.
Press the right arrow button to indicate
[ON].
Press the left arrow button to disable this function.
Press the ENTER button to register the new setting or
press the upward arrow button
to go to the next
setting.
OFF
16
[15] Resume mode ON/OFF
When resume mode is enabled, the last stitch of
the pattern sewn before turning the power off will be
resumed when the power is turned on again.
Press the right or left arrow button to turn [ON]
or [OFF] the resume mode.
NOTE:
When you turn the power on, the confirmation window
will open.
Press the OK key to resume the last stitch of the
pattern sewn.
Press the ENTER button to register the new setting
or press the upward arrow button to go to the next
setting.
ON 15