Janome MB-4S, Instruction Book

Page: 61 / 92

59
Customizing the Settings with the Sub Control Panel
Press the MODE button until the LCD screen shows
SET blinking.
Press the ENTER button to start the My setting mode.
q
MODE button
w
Enter button
[01] Buzzer sound control
Press the right or left arrow button to adjust
loudness of the buzzer.
To mute the buzzer, set the value to
[ 0].
Press the ENTER button to register the new setting or
press the upward arrow button
to go to the next
setting.
NOTE:
The value shown in the illustration is the default (preset)
value of each setting.
e
Default value
[02] Eco mode setting
The sewing lights will turn off, and the LCD screen
go dark if you have not used the machine for a while.
Pressing any button will turn on the sewing lights and
screen.
The eco mode timer can be set from 1 to 30 minutes
by pressing the right or left arrow button
.
Press the ENTER button to register the new setting or
press the upward arrow button
to go to the next
setting.
[03] Machine ID number
When connecting two or three units of the MB-4S
to the PC at the same time, you need to assign the
identification number to each machine.
Press the right or left arrow button
to select
the ID number.
Press the ENTER button to register the new setting or
press the upward arrow button
to go to the next
setting.
NOTE:
Press the downward arrow button
to go back to
the previous setting.
1 03
5 01
10 02
q
w
e