12. Threading the Bobbin Case
Place the bobbin into the bobbin
case.
Make sure the thread unwinds in
the direction of the arrow.
Pull the thread into the
bobbin case slit.
Draw the thread under the tension
spring and into the delivery eye.
Pull out about 4” (10 cm) of the
thread.
13. Threading the Machine
Raise the thread take-up lever to its highest position by turning the handwheel toward you.
Raise the presser foot.
Place the spool on the spool pin as shown, with the thread coming from the front of the spool.
Draw the thread around the thread guide as shown.
Draw the thread around the thread guide plate as shown.
Pull the thread up, then draw it through the thread take-up lever as shown.
Draw the thread and slip it into the needle bar thread guide.
Thread the needle eye from the front to back. Pull about 4” (10 cm) of the thread.
14. Drawing up the Bobbin Thread
Raise the presser foot. Hold the
needle thread with your left hand.
Turn the handwheel toward you
until the needle thread picks up the
bobbin thread.
Pull the both threads to the
back and under the presser
foot.
Bobbin
Bobbin case
Thread
Slit
Tension spring
Delivery eye
Thread guide
Thread guide
plate
Thread take-up lever
Needle bar
thread guide
Needle
Needle thread
Bobbin thread
Needle thread
Bobbin thread
1
2
3
4
1
3
4
5
5
2