Janome DM7200, Handbook & Instructions

Page: 53 / 68

51
Smocking
q
Stitch pattern: MODE 2: 10
w
Thread tension dial: 3 to 6
e
Presser foot: Satin stitch foot F
* The stitch pattern 59 in mode 1 can also be used.
4
q w
e
q
w
e
Smocking is a delicate decorative treatment used on
children’s clothes or women’s blouses.
Use a soft and lightweight fabric such as batiste, gingham
or challis.
Cut the fabric three times wider than the projected width.
Select straight stitch, set stitch length at “5.0” and loosen
the thread tension.
Sew rows of straight stitches 1 cm (3/8˝) apart across the
area to be smocked. Knot the threads along one edge.
From the other edge, pull the bobbin threads to distribute
the gathers evenly.
q
1 cm (3/8˝)
w
Knotted thread
Set the thread tension to 3–6 and select a smocking
stitch pattern.
Sew the smocking stitch pattern between the rows of
straight stitches.
Remove the straight stitches by pulling them out.
e
Straight stitch
Scallop Stitch
q
Stitch pattern: MODE 1: 46
w
Thread tension dial: 3 to 6
e
Presser foot: Zigzag foot A
* The stitch patterns 66 in mode 1 and 34 in mode 2 can
also be used.
4
q
w
e
Sew the stitches approximately 1 cm (3/8˝) inside the
fabric edge.
Trim the outside of the stitches as shown. Make sure not
to cut the thread.