www.toews.com
10
w
e
q
r
10 mm
w
e
q
w
e
q
w
q
Removing the Presser Foot
z
Turn off the power switch and unplug the
machine.
x
Turn the handwheel toward you to raise the needle.
Raise the presser foot.
c
Press the lever located on the back of the foot
holder. The presser foot will drop off.
q
Handwheel
w
Lever
e
Foot holder
Attaching the Presser Foot
z
Turn off the power switch and unplug the
machine.
x
Place the presser foot so that the pin on the foot
lies just under the groove of the foot holder.
c
Lower the foot holder to lock the foot into place.
v
Raise the presser foot lifter to check that the
presser foot is secure.
q
Foot holder
w
Groove
e
Pin
Adjustment of Foot Pressure
It is not necessary to adjust the presser foot’s pressure
for normal sewing.
When you sew heavy or lightweight fabrics, turn the
adjusting screw:
–– clockwise for heavyweight fabric.
–– counterclockwise for Iight weight fabric.
* For regular sewing, set the adjusting screw so
the head protrudes 10 mm from the top of the
machine.
q
To decrease
w
To increase
e
Adjusting screw
r
Top of the machine
Raising or Lowering the Presser Foot
By raising or lowering the presser foot lifter, the presser
foot goes up or down.
* While in operation, keep the presser foot lowered
except when threading the machine or test
running without threads.
NOTE:
Thread tension will be released when the presser foot
lifter is raised.
q
Presser foot
w
Presser foot lifter
Janome 900cp Instruction Manual
www.toews.com
900cp Owners Manual/ User Guide