background image

9

0

Auto

1

2

3

4

5

0

1

2

3

4

[1]

[2]

(1)

(2)

Zipper Application

Machine setting

1.

Pattern

#2

2.

Foot

E: Zipper foot

3.

Thread tension

Auto

4.

Stitch width

0

5.

Stitch length

1.5 ~ 2 (4 for basting)

To attach the zipper foot:

(1) Attach the zipper foot with the pin on the right,

when sewing on the left side of the zipper.

(2) Attach the zipper foot with the pin on the left, when

sewing on the right side of the zipper.

1.

Groove

2.

Pin

Fabric preparation:

[1]

Add 1 cm (3/8˝) to the zipper size. This is the

overall opening size.

3.

Right side of the fabric

4.

1 cm (3/8˝)

5.

Opening size

6.

Zipper size

7.

Slider

8.

Zipper teeth

9.

Zipper tape

10.

Wrong side of the fabric

11.

End of the opening

[2]

Place the right sides of the fabric together and sew

up to the end of the zipper opening, with a 2 cm

(13/16˝) seam allowance. Reverse the stitch to

fasten the seam. Baste along thezipper opening

with the stitch length 4 (0.4 cm).

12.

2 cm (13/16˝)

13.

Zipper opening (Basting)

14.

Reverse stitches

15.

End of the opening

16.

Seam

NOTE: Loosen the thread tension to one (1) for the

basting stitch.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

27

Summary of Contents for 6125QC












































Reviews: