Janome 6125QC, Instruction Book, Page: 13 / 43

[1]
[2]
[3]
[4]
1
2
3
5
4
•
Inserting the bobbin
[1]
Remove the hook cover and place the bobbin in
the bobbin holder with the thread running counter-
clockwise.
[2]
Guide the thread into the notch A on the front side
of the bobbin holder. Draw the thread to the left
sliding it between the tension spring blades.
1.
Notch A
[3]
Continue to draw the thread lightly until it slips into
notch B.
2
Notch B
[4]
Pull out about 10 cm (4˝) of thread and attach the
hook cover.
3.
Bobbin thread
4.
Hook cover plate
5.
Threading diagram
11