www.toews.com
18
Threading the Machine
Raise the take–up lever to its highest position by turning the
handwheel toward you.
Raise the presser foot.
Place a spool on the spool pin as shown, with thread coming
from back of the spool.
Draw the thread into thread guide using both hands.
While holding the thread near spool, draw thread down
into the tension area and then around the check spring
holder.
Firmly draw the thread up and through the take–up
lever from right to left.
Then draw the thread down and slip it into the lower
thread guide.
Draw the thread down and slip it into needle bar thread
guide on the left.
Thread the needle eye from front to back.
Note:
You may want to cut the end of thread with sharp scissors
for easier needle threading.
1
3
2
4
5
6
1
2
3
4
5
6
z
x
c
v
b
n
Janome 2212 Instruction Manual
www.toews.com
2212 Owners Manual/ User Guide