8
UMG 96RM-P/-CBM
Product description
Proper use
The UMG 96RM is intended for the measurement and
calculation of electrical parameters such as voltage,
current, power, energy, harmonics etc. in building
installations, on distribution units, circuit breakers and
busbar trunking systems.
The UMG 96RM is suitable for integration into fixed and
weatherproof switch panels. Conductive switch panels
must be earthed. Can be installed in any attitude.
Measured voltage and measured current must derive
from the same network.
The measurement results can be displayed and can be
read out and further processed via the interfaces.
The voltage measurement inputs are designed for
measurements in low voltage networks, in which rated
voltages of up to 300V relative to earth and surges in
overvoltage category III can occur.
The current measurement inputs of the UMG 96RM are
connected via external ../1A or ../5A current transformers.
The measurement in medium and high voltage networks
is implemented in principle via current and voltage
transformers. The UMG 96RM can be employed both
domestically and in industry.
Device characteristics
•
Supply voltage: 230V (95V-240V AC)
•
Frequency range: 45-65Hz
Device functions
UMG 96RM
-P
-CBM
3 voltage measurements,
300V
4 current measurements
(via current transformer)
RS 485 interface
(Modbus RTU)
Profibus
-
USB
2 + 4 digital outputs
4 digital inputs
Clock, memory
