17
CAUTION
Note that the when the Ethernet
cable is run in the same raceway
or conduit area it must have insu-
lation rated to the correct voltages
and listings required. For applica-
tions up to 240 VAC the in insula-
tion must be rated to 300 VAC. For
480 VAC applications use 600 VAC
insulation. The appropriate cables
can be provided by Janitza.
ATTENTION
Notez que lorsque le câble Ether-
net est branché dans le même
chemin de roulement ou la même
zone de conduits, il doit être isolé
aux tensions et aux listages requis.
Pour les applications jusqu’à 240
VAC, l’isolation intérieure doit être
nominale jusqu’à 300 VAC. Pour
les applications à 480 VAC, utilisez
une isolation 600 VAC. Les câbles
appropriés peuvent être fournis par
Janitza.
6
DIN Rail CT Interface Floating
Board (CTS24FBV)
Installation
· DIN Rail CT Interface Floating Boards
are oriented according to the panel-
board type and numbering scheme in
one of the four configurations shown.
· In Top Feed and Bottom Feed
orientations the panelboard type and
numbering is identical however the
user can select to install the Interface
Board with the Smart Port (RJ45
connector) top facing (Top Feed) or
bottom facing (Bottom Feed).
· Ensure that the connections to the
UMG 804 Smart Ports match those
shown on the orientation diagrams.
· Smart Ports hosting the Interface
Card must be correctly set in the
HTML console (refer to the manual
under www.janitza.com)
Summary of Contents for UMG 804
Page 19: ...19 1 2 3...
