background image

RD 96

www.janitza.de

24

8.  Service and maintenance

Prior to outbound delivery, the device is subjected 
to various safety tests and is marked with a seal.

   WARNING

Warning of unauthorized tampering or improper 

use of the device. 

 

Opening, dismantling or unauthorized manipulation 

of the device which goes beyond the mechanical, 

electrical or other operating limits indicated can 

lead to material damage or injury, up to and includ-

ing death.

 ·

Only electrically qualified personnel are 

permitted to work on the devices and their 

components, assemblies, systems and cur-

rent circuits!

 ·

Always use your device or component only 

in the manner described in the associated 

documentation.

 ·

In the event of visible damage, or for the 

purpose of repair and calibration, return the 

device to the manufacturer!

8.1 

Front panel foil and display

Please note the following for the care and cleaning 
of the front foil and the display:

ATTENTION

Material damage due to improper care and 

cleaning of the device. 

 

The use of water or other solvents, such as dena-

tured alcohol, acids, acidic agents for the front foil 

or the display can damage or destroy the device 

during cleaning. Water can, for example, penetrate 

into the device housing and destroy the device.

 ·

Clean the device, the front foil or the display 

with a soft cloth.

 ·

Use a cloth moistened with clear water for 

heavy soiling.

 ·

Clean the front foil and the display, e.g. of 

fingerprints, with a special LCD cleaner and a 

lint-free cloth.

 ·

Do not use acids or acidic agents to clean the 

devices.

8.2 

Service

For questions not answered or described in this 
manual, please contact the manufacturer. Please 
be certain to have the following information ready 
to answer any questions:

 ·Device designation (see rating plate).
 ·Serial number (see rating plate).
 ·An exact error description.

INFORMATION

For opened devices (damaged or removed seal):

 ·New safety inspections are required for safe 

operation!

 ·The warranty expires!

The warranty is only valid for unopened devices!

INFORMATION

This user manual describes the RD 96 in combi-

nation with the UMG 801 and provides informa-

tion on the operation of the device.

In addition to this user manual, please also con-

sult the related usage information relevant to the 

previously mentioned devices, such as:

 ·

Installation instructions.

 ·

Data sheets.

 ·

Safety information.

 ·

As applicable, documents for expansion mod-

ules.

 ·

Online help for the network visualization soft-

ware GridVis®.

Summary of Contents for RD 96































Reviews: