janitza RD 96, User Manual And Technical Data

Page: 13 / 30

www.janitza.de RD 96
13
3.2 Intended use
The external RD 96 display:
·is only for use in the industrial sector.
·is designed for front panel installation and con-
nection of the UMG 801 DIN rail measurement
device mounted in the switchboard cabinet or
small distribution board.
·is suitable for installation in fixed switchboard
cabinets or small distribution boards, in any
mounting orientation (front panel).
·is not intended for installation in vehicles! Use of
the device in non-stationary equipment consti-
tutes an exceptional environmental condition and
is only permissible by special agreement.
·is not intended for installation in environments
with harmful oils, acids, gases, vapors, dusts,
radiation, etc.
·requires neither additional software nor drivers
and functions using plug & play via the USB inter-
face of the UMG 801.
Safe and trouble-free operation of the device
requires proper transport, storage, assembly,
installation, operation and maintenance.
3.3 Incoming goods inspection
Safe and trouble-free operation of this device and
its components presupposes proper transport,
proper storage, set-up and assembly as well as
operation and maintenance in addition to com-
pliance with the safety information and warning
notices.
Exercise due caution when unpacking and packing
the device, do not use force and only use suitable
tools.
Before installing the device, please check the
following:
·Its flawless mechanical condition by visual in-
spection.
·The scope of delivery for completeness.
If it can be assumed that safe operation of the
device is no longer possible:
·Disconnect the device from operation immediate-
ly!
·Secure the device against being switched on
again!
It can be assumed that safe operation is no longer
possible if the device, for example:
·Has visible damage.
·No longer functions despite an intact power
supply.
·Was subjected to extended periods of unfavor-
able conditions (e.g. storage outside of the per-
missible climate thresholds without adjustment to
the room climate, condensation, etc.) or transport
stress (e.g. falling from an elevated position, even
without visible external damage, etc.).