janitza RD 96, User Manual And Technical Data

Page: 19 / 30

www.janitza.de RD 96
19
5.3 Securing
Secure the device inside the switchboard or on the
front panel using the fastening clips on the side. To
do so, proceed as follows:
·Before inserting the device, remove the fastening
clips (e.g. with a screwdriver) by levering them
horizontally.
Mounting clip
Fig.: Fig. Side view of the RD 96
with fastening clips.
·Insert the device through the front panel or
switchboard from the front.
·Attach the clips to the side of the device by push-
ing them in and snapping them into place.
·Screw in the clamping screws until they touch the
mounting plate.
·Then tighten the clamping screws with two fur-
ther turns each. Too tightly tightened clamping
screws can destroy the fastening clips!
Mounting plate
Clamping screw
Screwdriver
Mounting clip
INFORMATION
Once the clamping screws touch the mounting
plate, turn them a max. of 2 further turns!
Fig.: Side view - fastening the RD 96