FBM-Serie
7
Establishing communication to the measurement device
In order to set the Emax parameters, the first step is establishing the communication between the
measurement device and a computer. We recommend installing the configuration and evaluation
software „GridVis“. The measurement device should be assigned an IP address, the entry of the
IP address is different for display devices and mounting rail devices. The IP address helps identify
the measurement device in an ethernet network.
Setting the IP address on a UMG604 / UMG605
1. Simultaneously press key 1 and key 2 one second
2. You are now in the parameter menu.
The letters PRG identify this menu.
C
Note!
Key 1: Change segment selection
Key 2: Change value (long - / short +)
The following parameters must be parameterized for the Emax function on the device:
Parameter
Designation
Parameter
recommendation
Settings
205
TCP mode
0
Fixed IP
203
RS485 mode
1
Master
202
RS485 baud rate
2
38,4 kbit/s
200
Device ID
>33
>32
300
IP Adresse XXX --- --- ---
192
*
301
IP address --- XXX --- ---
168
*
302
IP address --- --- XXX ---
001
*
303
IP address ---.--- --- XXX
010
*
304
IP mask XXX --- --- ---
255
*
305
IP mask --- XXX --- ---
255
*
306
IP mask --- --- XXX ---
255
*
307
IP address ---.--- --- XXX
000
*
*Parameters can be freely selected or parameterized according to recommendations
