FBM-Serie
13
10 Inputs PT1000
6 Analog outputs 0...10V
1 ADRESS 6 P E Bd
UB 24V DC
BUS
function
RS 485
BUS
m
0 volt terminals are internally connected and must only be connected once. Con-
nection terminals for the potential-free contacts are implemented separately. With
analog inputs and outputs, it is recommended to connect the 0 voltage line (C...)
for accuracy reasons.
Connection terminals for the potential-free contacts are implemented separately.
C
Note: The 10V analog outputs are in preparation and are not yet integrated in the
current version (FBM10PT1000/100).
c
Connection of the device may only occur in de-energized state and if it must be
connected under voltage, the GND must first be connected.
m
Bus polarization necessary!
Connection diagram FBM10PT1000/PT100
Temperature input 2-wire
Connection diagram FBM DI8AI8
